Table of Contents
Advertisement
31
Monthly Maintenance (while appliance is in use)
Make sure the appliance has fully cooled prior to conducting service.
Door and Glass Inspection
The door must form an air-tight seal to the firebox for the stove to work correctly. Inspect the door gasket
to make sure it forms an air-tight seal to the firebox.
The door can be lifted off the hinges if extensive repairs are conducted.
High-Temperature
anti-sieze may be
used on the door
hinges to eliminate
squeaks.
If the glass is damaged, replace
it - see "Replacement Parts" for
details.
The door latch should pull the door against the face of the stove. If the latch requires adjustment, follow
the directions below.
Door Adjustment
The door latch should hold the door tightly against the stove while allowing the handle to rotate fully. If
the latch requires adjusting, follow the directions below.
Loosen the bottom nut with a 7/16" wrench
(see arrow to the right). Tap the bottom nut
inwards, moving the door catch inwards.
Tighten the nut and test the operation. You
may need to repeat this process, either
moving the nut inwards or outwards until the
door catch is in the correct position.
© Travis Industries
Maintaining Your Appliance
1/12/2023 - 1574
Use RTV high
temperature 600° silicone
to adhere loose gasket.
Severely frayed or thread-bare
gasket should be replaced.
Door Handle
Endeavor NexGen-Hybrid
Advertisement
Table of Contents
