Door Parts; Replacing The Glass; Replacing The Door Gasket; Replacing The Door Handle - Travis Industries Endeavor NexGen-Hybrid Manual

Table of Contents

Advertisement

35

Door Parts

Replacing the Glass

The glass must not contact the door shell or retainer directly. The glass gasket wraps around the edge
of the glass and isolates it from the metal surfaces to prevent cracking. Do not over-tighten the glass
retainer screws.

Replacing the Door Gasket

The door gasket inserts into the outer groove of the door retainer. Stove gasket cement holds it in place.
Before installing, remove any residual cement. Lay the gasket in place (start at the lower-left corner) and
cut off any excess gasket (do not stretch the gasket. The cement fully cures with heat from the stove.
You may need to open and close the door repeatedly to get the gasket to seat fully.

Replacing the Door Handle

See the illustration above for a component list (see pg. 31 for details on adjusting the door).
© Travis Industries
Maintaining Your Appliance
1/12/2023 - 1574
Endeavor NexGen-Hybrid

Advertisement

Table of Contents
loading

Table of Contents