Advertisement
Chapter 2
Entering keycodes on the BCM system
There are five ways to enter keycodes:
•
"Loading a keycode using Element Manager" on page 9
•
"Manually adding a keycode using Element Manager" on page 10
•
"Adding a keycode using the telset administration interface" on page 11
•
"Loading a keycode using the Startup Profile" on page 13
•
"Loading a keycode using Network Configuration Manager" on page 13
Note: You must have access privileges to enter a keycode on the BCM system.
Contact your system administrator for more information.
Loading a keycode using Element Manager
If you retrieved a keycode file from the Keycode Retrieval System (KRS), use this method.
To load a keycode file
1
Log on to Element Manager and select the BCM you want to access.
For information about how to log on to Element Manager, refer to your administration guide.
2
On the Task Navigation Panel, select the Configuration tab.
The configuration folders appear.
3
Select the System folder and click the Keycodes task.
The Keycodes panel appears.
4
Click Load File.
The Open file dialog box appears.
5
Browse to where you saved the keycode file you downloaded from KRS.
6
Click Open.
The file uploads and the feature appears in the Keycodes list.
Warning: You must reboot your BCM system if a dialog box prompts you to do
so.
Chapter 2 Entering keycodes on the BCM system
Keycode Installation Guide
9
Advertisement
