Advertisement
12
Chapter 2 Entering keycodes on the BCM system
To add a keycode using telset administration interface
User ID:_
RETRY
Password:_
RETRY
Features Codes
NEXT
SID:
NEXT
Sequence ID
NEXT
CHNGE
Features List
NEXT
SHOW
VM Seat
NEXT
CHNGE
Data:_
CHNGE
Data:2
CANCL
RETRY
Data:2
CHNGE
VM Seat
NEXT CHNGE
VM Seat
NEXT CHNGE
Features List
NEXT
SHOW
Keycode
NEXT
SHOW
1st:
NEXT CHNGE
1st:
CANCL
RETRY
NN40010-301
NN40010-301
1.Press Feature 9*8.
2.Log on by following the voice prompts or the display button options.
OK
3.Enter your password and press OK.
The Features Codes display.
OK
4.Press OK to continue.
The system ID (SID) displays.
OK
5.Press NEXT.
BACK
6.Enter your sequence ID, and press NEXT.
BACK
7.Press SHOW to scroll through the Features List and select the feature
you want.
BACK
8.In this example, the feature is VM Seats. Press CHNGE to enter the
feature data value.
BACK
The current feature data value displays.
9.Press CHNGE to enter the new feature data value. For example, if you
BACK
have two voicemail seats, enter 2.
10. Enter the new feature data value. Press OK to accept the data feature
value.
OK
11.The new feature data value displays. Press BACK to return to the
feature.
BACK
12.Press NEXT to scroll through the feature list and select the feature you
want. Repeat steps above to add more features.
BACK
Add all features and feature data values before you enter the keycode.
13.After you add all of the features you have purchased, press BACK.
The Features List displays.
BACK
14. Press NEXT to continue to the Keycode display.
BACK
15.Press SHOW to enter the keycode.
The keycode is a 24-digit code. Enter the keycode in three 8-digit sets.
BACK
16.Press CHNGE to enter the first eight digits of the keycode.
BACK
17.Enter the first eight digits of the keycode and press OK.
OK
Advertisement
