Replacing Tail/Back-Up Lamp Bulb (Rear Combination Lamp Type A) - Kia Soul 2022 Owner's Manual

Maintenance
the bulb align with the slots in the
socket.
6. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
7. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly and
turning the socket clockwise.
8. Reinstall the lamp assembly to
the body of the vehicle.
Replacing tail/back-up lamp bulb
(Rear combination lamp Type A)
1. Open the liftgate.
2. Remove the service cover assem -
bly to the body of the vehicle.
(Loosen the lamp assembly
retaining screws and remove the
lamp assembly from the body of
the vehicle for back-up lamp)
OSK3078083NR
3. Remove the socket from the
assembly by turning the socket
counterclockwise until the tabs on
the socket align with the slots on
the assembly.
Tail lamp
OSK3078055NR
Back-up lamp
OSK3078090NR
4. Remove the bulb from the socket
by pressing it in and rotating it
counterclockwise until the tabs on
the bulb align with the slots in the
socket. Pull the bulb out of the
socket.
5. Insert a new bulb by inserting it
into the socket and rotating it
until it locks into place.
6. Install the socket in the assembly
by aligning the tabs on the socket
with the slots in the assembly.
Push the socket into the assem -
bly and turn the socket clockwise.
7. Install the service cover by putting
it into the service hole.
Light bulbs
7
7 73