Kia Soul 2022 Owner's Manual page 513

Hide thumbs Also See for Soul 2022:
Table of Contents

Advertisement

Maintenance
Finish maintenance
Washing
To help protect your vehicle's finish
from rust and deterioration, wash it
thoroughly and frequently at least
once a month with lukewarm or cold
water.
If you use your vehicle for off-road
driving, you should wash it after
each off-road trip. Pay special
attention to the removal of any
accumulation of salt, dirt, mud, and
other foreign materials. Make sure
the drain holes in the lower edges of
the doors and rocker panels are
kept clear and clean.
Insects, tar, tree sap, bird droppings,
industrial pollution and similar
deposits can damage your vehicle's
finish if not removed immediately.
Even prompt washing with plain
water may not completely remove
all these deposits. A mild soap, safe
for use on painted surfaces, may be
used.
After washing, rinse the vehicle
thoroughly with lukewarm or cold
water. Do not allow soap to dry on
the finish.
After washing the vehicle, test the
brakes while driving slowly to see if
they have been affected by water. If
braking performance is impaired,
dry the brakes by applying them
lightly while maintaining a slow for -
ward speed.
CAUTION
Do not use strong soap, chemical
detergents or hot water, and do
not wash the vehicle in direct sun -
light or when the body of the
vehicle is warm.
Be careful when washing the side
windows of your vehicle, espe -
cially with high-pressure water.
Water may leak through the win -
dows and wet the interior.
To prevent damage to the plastic
parts and lamps, do not clean with
chemical solvents or strong
detergents.
High-pressure washing
When using high-pressure washers,
make sure to maintain sufficient
distance from the vehicle.
Insufficient clearance or excessive
pressure can lead to component
damage or water penetration.
Do not spray the camera, sensors or
its surrounding area directly with a
high pressure washer. Shock applied
from high pressure water may
cause the device to not operate
normally.
Do not bring the nozzle tip close to
boots (rubber or plastic covers) or
connectors as they may be dam -
aged if they come into contact with
high pressure water.
Appearance care
7
7
81

Advertisement

Table of Contents
loading

Table of Contents