Replacing License Plate Lamp Bulb; Replacing Map Lamp (Bulb Type) Bulb - Kia Soul 2022 Owner's Manual

Hide thumbs Also See for Soul 2022:

Table of Contents

Replacing license plate lamp bulb

1. Remove the lamp assembly by

using a flat-blade screwdriver.

2. Remove the socket from the

assembly by turning the socket

counterclockwise until the tabs on

the socket align with the slots on

the assembly.

3. Remove the bulb from bulb-

socket by pulling it out.

4. Insert a new bulb by inserting it

into the bulb-socket.

5. Install the socket in the assembly

by aligning the tabs on the socket

with the slots in the assembly.

Push the socket into the assem -

bly and turn the socket clockwise.

6. Install the lamp assembly to the

body of the vehicle.

Replacing map lamp (bulb type)

OSK3078084NR

1. Using a flat-blade screwdriver,

gently pry the lens cover from

lamp housing.

2. Remove the bulb by pulling it

straight out.

3. Install a new bulb in the socket.

4. Align the lens cover tabs with the

lamp housing notches and snap

the lens into place.

Be careful not to dirty or damage

the lens, lens tab, and plastic hous -

ings. Allow the bulb to cool down

before handling it.

Table of Contents