Table 1
5000 Series Switch Platforms (cont'd.)
Common hardware features
The following hardware features are part of all 5000 Series switches:
•
Two stack connectors, each operating an aggregate 80 or 144 Gbps
•
UI push button
•
LED display panel
•
Console port (DB-9 connector
•
Two 10/100/1000 Mbps copper Ethernet diagnostics ports
•
USB 2.0 Type-A port
The following figure shows the front panel of the 5698TFD switch.
Copyright © 2008–2009 Nortel Networks
Ethernet Routing Switch 5000 series models 27
•
Six 10Gbit XFP ports
•
PoE
•
Layer 2/Layer 3
•
Stackable Ethernet switch
•
2 rack units (U) high
•
Uses modular power supply units and
has three field-serviceable power supply
receptacles, which support 1000W AC or DC
power supply modules.
ERS 5000 Series Installation
NN47200-300 04.03
13 April 2009