Factory Option Sets - Motorola V.3400 User Manual

FACTORY OPTION SETS

FACTORY OPTION SET #1
(Asynchronous Dial-up with V.42bis Protocol) (AT&F or AT&F1)
• MODEM OPTIONS
DCE rate - 28800
Modulation automode
V.34 rate threshold high
V.34 asymmetric rate enabled
Normal originate
Fast train disabled
Auto retrain enabled
Sq auto rate disabled
Transmit clock internal
Dial line
Jack type RJ11 (permissive)
Line current disconnect long
Long space disconnect enabled
V.22 guard tone disabled
• PROTOCOL OPTIONS
LAPM protocol enabled
MNP protocol enabled
Protocol fallback enabled
Data compression normal
Constant DTE speed
DTE flow control XON/XOFF
DCE flow control XON/XOFF
XON/XOFF pass through disabled
Inactivity timer off
Break control 5
V.42 fast detect enabled
• SPEAKER OPTIONS
Volume medium
On until carrier detect
Command Index and Defaults
•
TEST OPTIONS
Bilateral analog loop disabled
Bilateral digital loop disabled
DTE local test disabled
DTE remote test disabled
Remote commanded test enabled
Test timeout off
•
DIAL LINE OPTIONS
Tone dial
Auto dial #1
Wait for dial tone
Wait delay 2 seconds
Pause delay 2 seconds
Call timeout 30 seconds
Answer on 1 ring
801 V.32 timeout long
Autocallback disabled
•
DTE OPTIONS
Async data
DTE rate - 9600
8 bit, No parity
Async controlled dialer
AT command set enabled
Ignores DTR
DSR forced high
DCD forced high
CTS forced high
DTE fallback disabled
Options retained at disconnect
V.3400 E-19