Disconnect Buffer Delay; Maximum Transmit Block Size; Auto-Reliable Fallback Character - Motorola V.3400 User Manual

Status Registers
Disconnect Buffer Delay S62
The S62 register determines the delay before disconnect, to allow
buffers to empty, when disconnect conditions exist.
Bit Value
7-0 0 %D
1-255 %Dn
* default
Maximum Transmit Block Size S63
The S63 register sets the maximum transmit block size.
Bit Value
7-0 63 \A
127 \A1
191 \A2
255 \A3
* default
Auto-Reliable Fallback Character S64
The S64 register stores the selected ASCII value of the auto-reliable
fallback character.
Bit Value
7-0 0 %A
1-127 %An
* default
S65-66
Reserved
10-20
Command
Buffer disabled *
Disconnect buffer delay value (seconds)
Command
Maximum block size = 64
Maximum block size = 128
Maximum block size = 192
Maximum block size = 256 *
Command
Disable auto-reliable fallback character *
ASCII value 1-127
Description
Description
Description
V.3400