Part Identification Chart - Weider 6900 User Manual

PART IDENTIFICATION CHART

Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw-
ing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in the
hardware kit, check to see if it has been preassembled. Extra parts may be included.
13mm Spacer
(52)
10mm Spacer
(86)
M6 Washer (82)
Self-tapping Screw (69)
M8 Washer (59)
Self-tapping Screw (49)
M10 Washer (57)
Large Washer (85)
M10 x 25mm
Screw (77)
M8 x 20mm
Shoulder Bolt (65)
M4 x 25mm
M6 x 16mm
Screw (62)
M4.2 x 19mm
M10 Locknut (56)
M8 Locknut (58)
M6 Locknut (51)
6
M6 x 35mm Screw (64)
M10 x 45mm Bolt (81)
M10 x 50mm Bolt (66)
M8 x 58mm Carriage Bolt (87)
M10 x 63mm Bolt (75)
M8 x 65mm Bolt (68)
M10 x 68mm Bolt (71)
M10 x 77mm Bolt (79)
M10 x 80mm Bolt (67)
M10 x 64mm Bolt Set (76)
M10 x 130mm Bolt (72)