PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra parts may be included.
M6 Washer
(21)
M8 Locknut
(22)
M8 Curved
Washer (23)
M10 Curved
Washer (26)
M6 x 16mm
Screw (27)
6
M10 x 50mm Screw (19)
M8 x 68mm Bolt (24)
M8 x 68mm Carriage Bolt (20)
M6 x 73mm Screw (18)
M8 x 75mm Bolt (17)
M8 x 77mm Bolt (28)