PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. Note: If a part is not in
the hardware kit, check to see if it has been preassembled. Extra parts may be included.
M8 Locknut (58)
M10 Locknut (56)
M12 Nut (82)
M10 x 25mm Screw (77)
M8 x 22mm Shoulder Bolt (65)
M4 x 20mm Self-tapping Screw (69)
M6 x 16mm Screw (62)
Large Washer (78)
M10 Washer (57)
M8 Washer (59)
M6 Washer (80)
M4 Washer (33)
6
M10 x 46mm Bolt (81)
M10 x 51mm Bolt (66)
M6 x 63mm Screw (70)
M8 x 63mm Carriage Bolt (64)
M10 x 63mm Bolt (75)
M8 x 65mm Bolt (68)
M10 x 67mm Bolt (71)
M10 x 70mm Bolt (72)
M10 x 77mm Bolt (79)
M10 x 85mm Bolt (67)
M10 x 155mm Bolt (74)