Part Identification Chart - Weider WEBE96120.0 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following
the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see
whether it has been preassembled. Extra parts may be included.
M10 Locknut
M8 Locknut M6 Washer
M8 Washer
(17)–17
(32)–1
(59)–4
M10 Washer
(58)–2
(19)–18
M4 x 19mm
M6 x 20mm
M6 x 40mm Screw (56)–4
Screw (18)–3
Screw (33)–6
M8 x 65mm Bolt (28)–1
M10 x 65mm Carriage Bolt (16)–8
M10 x 70mm Bolt Set (60)–1
M10 x 20mm
Screw (9)–6
M10 x 70mm Bolt (29)–4 M10 x 75mm Bolt (20)–4
M10 x 170mm Bolt (55)–2
8