Nortel BayStack 100-S Install Manual page 61

• Unit – Specifies which Instant Internet units the workstations use. This option
is for IPX workstations only; Instant Internet ignores this entry on TCP/IP
workstations.
• Choice – Specifies whether you are presented with the option to install the
administration utilities. The option
utilities; the option
To bypass the administration programs prompt and have the Install program
automatically use the choice option you entered, type an asterisk (*) before
the directory path and name. For example,
Note: For additional options that apply only to IPX workstations when
you have more than one Instant Internet unit, refer to Using the BayStack
Instant Internet Management Software Version 7.11.
Following is an example of a single Instant Internet Workstation Preconfiguration
file that specifies a default installation to a local drive (
not install the administration utilities (
[DEFAULT]
description=default configuration
type=private
directory=c:\instinet
unit=iibox1
choice=-admin
To edit the install.cfg file:
1 Start any text editing program on your system, for example, Notepad.
2
Open the install.cfg file.
3
Edit the information in this file according to the defaults you want for all
workstations.
4 Save the file.
Installing the BayStack Instant Internet Management Software Version 7.11
Chapter 3 Installing the Instant Internet software 61
+admin
does not install them.
-admin
choice=-admin
installs the administration
.
choice=*-admin
type=private
):
), and does