Nortel BayStack 100-S Install Manual page 92

92 Appendix B Workstation support
1
From the Windows Start menu, choose Settings > Control Panel.
The Control Panel window opens.
2
Double-click the Network and Dial-up Connection icon.
The Network and Dial-up Connections dialog box opens.
3
Double click the Local Area Connections icon.
The Local Area Connections Status dialog box opens.
4
Click Properties
The Local Area Connections Properties window opens.
5
Select Internet Protocol (TCP/IP) from the component list.
6 Click Properties.
The Internet Protocol (TCP/IP) Properties dialg box opens.
7 Select "Use the following IP address" and enter the following information:
•
•
•
8
Select "Use the following DNS server address" and enter the following
information:
•
•
9 Click OK.
10 Click OK.
11 Click Close.
209226-B
The IP address of your workstation.
The subnet mask of your network.
The IP address of the Instant Internet unit in the Default gateway box.
The IP address of the Instant Internet unit in the preferred DNS server
box.
The Alternate DNS server IP address (if applicable).