Nortel BayStack 100-S Install Manual page 91

11 At the prompt to restart your system, click Yes.
To configure TCP/IP without DHCP on a Windows NT workstation:
1
From the Windows Start menu, choose Settings > Control Panel.
The Control Panel window opens.
2
Double-click the Network icon.
The Network dialog box opens.
3
Click Protocols.
4
Select TCP/IP Protocol.
5
Click Properties.
The TCP/IP Properties dialog box opens and IP Address is selected. The
workstation's IP Address and subnet mask are displayed.
6
In the Default Gateway box, enter the IP address of the Instant Internet unit's
client-side interface.
7
Click DNS Configuration.
8
In the DNS Server Search Order box, enter the IP address of the Instant
Internet unit's client-side interface (the same IP address you entered for the
gateway address in step 6), and then click Add.
The IP address is added to the DNS Search Order list.
9
Click OK through all dialog boxes to save the settings.
10 At the prompt to restart your system, click Yes.
Note: At this point, you should be able to ping the Instant Internet unit,
at least on its client-side interface. You will not necessarily be able to
ping the router or the DNS configured in the Instant Internet unit since
the Instant Internet unit serves as a firewall when IP Forwarding is
disabled. For more information on pinging a host, refer to "Testing the
Connection to a Host" in Using the BayStack Instant Internet
Management Software Version 7.11.
To configure TCP/IP without DHCP on a Windows 2000 workstation:
Installing the BayStack Instant Internet Management Software Version 7.11
Appendix B Workstation support 91