Nortel BayStack 100-S Install Manual page 52

52 Chapter 3 Installing the Instant Internet software
3
In the IP address box, enter the IP address of the Instant Internet unit's static
device interface.
Be sure to enter an IP address that is on your device's network.
Instant Internet automatically calculates the numeric subnet mask. Do not
change this value unless your network uses nonstandard subnets and you are
familiar with IP addressing.
4
Click OK.
The Enter Router Address dialog box opens.
5
Enter the numeric IP address of your external router and then click OK.
The Enter Name Server Address dialog box opens
6
Enter the IP address of the DNS server provided by your ISP and then click
OK.
If your ISP provided more than one DNS server, enter the first one. A Name
Server message box opens prompting you to enter another DNS server. It is
always a good idea to enter more than one DNS server in case one of them is
unavailable.
7
Select whether or not to enter another DNS server.
To enter another DNS server, click Yes and repeat step
DNS servers. After you enter all the DNS servers or to continue without
entering another DNS server, click No.
The Instant Internet is Configured dialog box opens.
8 The remaining steps are the same regardless of your individual configuration.
Continue with the procedure
page
209226-B
57.
"Finishing the connection configuration" on
(Figure 7 on page 43).
6 until you enter all the