Table of Contents
Advertisement
USING THE PROJECTOR
Sleep Timer (min.)
Configure the sleep timer.
‡
Sleep Timer (min.): Sets the countdown timer interval. The countdown timer will start, with or without
a signal being sent to the projector. The projector will automatically power off when the countdown has
finished (in minutes).
Note:
The Sleep Timer is reset every time when the projector is powered off.
‡
Always On: Check to set the sleep timer always on.
Power Mode (Standby)
Set the power mode setting.
‡
Active: Choose "Active" to return to normal standby.
‡
Eco: Choose "Eco." to save power dissipation further < 0.5W.
USB Power (Standby)
Enable or disable the USB power function when the projector is in standby mode.
Setup security menu
Security
Enable this function to prompt for a password before using the projector.
‡
On: Choose "On" to use security verification when the turning on the projector.
‡
Off: Choose "Off" to be able to switch on the projector without password verification.
Note:
The default password is 1234.
Security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
Change Password
Use to set or modify the password that is prompted when turning the projector on.
38
English
Advertisement
Table of Contents
