Ricoh IM 550F Field Service Manual page 222

After pressing down for over five seconds, stop pressing on the panel and RemoteConnect Support
will open.
If the setup was done correctly, four digits will be displayed on the panel. If the setup was not done
correctly, the four digits will not be displayed.
RemoteConnect Service needs an Internet connection, so the following error message might
appear after long-pressing the status bar if an Internet connection is not detected. To check the
connection, open the web browser in Smart Operation Panel and navigate to a webpage to confirm
that the machine is connected to the Internet.
•
If a webpage cannot be connected to via the web browser, check the general network
configuration settings, such as the IP address and proxy settings.
Uninstalling RemoteConnect Support
Some customers might ask for this feature to be disabled because of security precautions. In many
2.Installation
211