Ricoh IM 550F Field Service Manual page 292

Exterior Covers (P 800/801)
Upper Cover
Remove the controller cover.
1.
Open the upper cover [A].
2.
Remove the two screws from the upper cover [A].
3.
•
The screw [B] is a sems screw. The screw [C] is a tapping screw. Be careful not to use the
wrong screws when installing the upper cover.
Remove the screw from the rear side of the upper cover [A].
4.
Lift the upper cover [A] by releasing the two hooks, and then put it on the mainframe so that you
5.
(Controller Cover)
4.Replacement and Adjustment
281