Image Adjustment
Printing
•
Make sure the paper is set correctly in each paper tray before you start these adjustments.
•
Use Trimming Area Pattern (SP2-109-003, No.14) to print the test pattern for the following
procedures.
•
Set SP2-109-003 to "0" again after completing these printing adjustments.
Registration: Leading Edge/Side-to-Side
A: Leading Edge Registration (4 ± 2.5 mm)
B: Side-to-side Registration (4 ± 2.5 mm)
Check the leading edge registration [A] for each paper feed station, and adjust them using SP1-
1.
001.
Paper Feed Station
Tray 1 (Main unit)
Tray 2 (Optional tray)
Tray 3 (Optional tray)
Tray 4 (Optional tray)
Tray 5 (Optional tray)
Bypass Tray
Duplex Tray
Check the side-to-side registration [B] for each paper feed station, and adjust them using SP1-002.
2.
Paper Feed Station
Tray 1 (Main unit)
Tray 2 (Optional tray)
Tray 3 (Optional tray)
Tray 4 (Optional tray)
SP No.
SP1-001-001
SP1-001-002
SP1-001-003
SP1-001-004
SP1-001-005
SP1-001-006
SP1-001-007
SP No.
SP1-002-001
SP1-002-002
SP1-002-003
SP1-002-004
4.Replacement and Adjustment
Adjustment Range
4±2.5 mm
Adjustment Range
4±2.5 mm
225