Fcc Statement (Applicable In Us) / Ic Statement; Ec Declaration Of Conformity (Original) - Hilti POT 10 Operating Instructions Manual

15 FCC statement (applicable in US) / IC statement (applicable in Canada)
CAUTION
This equipment has been tested and found to comply
with the limits for a class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and may radiate radio frequency energy.
Accordingly, if not installed and used in accordance with
the instructions, it may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television recep-

16 EC declaration of conformity (original)

Designation:
Type:
Generation:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
until 19th April 2016: 2004/108/EC, from 20th April 2016:
2014/30/EU, 2011/65/EU, 2006/66/EC, EN ISO 12100.
Index
A
Adjusting set . . . . . . . . . . . . . . . . . . . . . 24
Adjustment
Calibration . . . . . . . . . . . . . . . . . . . 23, 37
Angle indicator . . . . . . . . . . . . . . . . . . 23, 35
Angle measurement
Horizontal circle . . . . . . . . . . . . . . . . 23, 33
Angle measurement system . . . . . . . 22-23, 27, 36
Angle units . . . . . . . . . . . . . . . . . . . . 23, 35
Automatic power-off
switching on-off . . . . . . . . . . . . . . . . 23, 36
tion, which can be determined by turning the equipment
on and off, the user is encouraged to try to correct the
interference by one or more of the following measures:
Re-orient or relocate the receiving antenna.
Increase the distance between the equipment and re-
ceiver.
Consult the dealer or an experienced TV/radio technician
for assistance.
NOTE
Changes or modifications not expressly approved by Hilti
could void the user's authority to operate the equipment.
Hilti Corporation, Feldkircherstrasse 100,
Theodolite
FL‑9494 Schaan
POT 10
01
2010
Paolo Luccini
Head of BA Quality and Process Man-
agement
Business Area Electric Tools & Ac-
cessories
06/2015
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
B
Battery
insert . . . . . . . . . . . . . . . . . . . . . . 23, 32
C
Calibration . . . . . . . . . . . . . . . . . . . . 23, 37
Adjustment . . . . . . . . . . . . . . . . . . . 23, 37
Calibration Service . . . . . . . . . . . . . . . . 23, 39
Checking functions . . . . . . . . . . . . . . . . 23, 32
Compensator
switching on-off . . . . . . . . . . . . . . . . 23, 37
Edward Przybylowicz
Head of BU Measuring Systems
BU Measuring Systems
06/2015
41
en