Basic Operation; Turning The Power On/Off; Viewing The Screen - Shimano STEPS Series User Manual

Basic operation

Turning the power ON/OFF

Basic operation
Turning the power ON/OFF
When the power of this product is turned ON, all components connected to the drive unit are also turned ON
(such as assist driving, the electronic gear shifting mechanism, and the lights).
Before turning the power ON, please refer to the "
Manual (Gen.2)
The battery is firmly attached to the battery mount.
The power cannot be turned ON while charging.
Do not step on the pedal when turning the power ON/OFF. Doing so may cause a system error.
1. Press and hold the power button down until the screen turns on.
When the main power is turned ON, a screen similar to that shown below is displayed, then switches to the
main screen.
Power button
If the bicycle is left unused for 10 minutes or more after turning the power ON, the power
automatically turns OFF (auto power OFF function).

Viewing the screen

The items displayed on the main screen differ according to the assist bicycle.
Main screen
" to check the following:
SHIMANO STEPS Special Battery and Parts User's
12