Battery - Racelogic Performance Box Touch V1 User Manual

Hide thumbs Also See for Performance Box Touch V1:

Table of Contents

The first time the unit is booted up, it will present the

previously used display mode.

Battery

To give you the opportunity to use the unit without

connecting it to a power source, we have a battery (the

RLACS290) available for the Performance Box Touch.

When the battery is installed, you can use the Power

button on the battery to turn the unit on or off. You do

this by pressing and holding the Power button for a few

seconds.

If you plug the power cable into the unit when the battery

is already attached to the unit, the unit will turn on

automatically.

The battery will provide a minimum of 6 hours of battery

life, however, you can increase the battery life up to 9

hours by using the

minimum brightness

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/

User_Guide_%E2%80%93_Performance_Box_Touch_V1/01_Getting_Started_%E2%80%93_Performance_Box_Touch_V1

Display Mode

screen. Every time after this, it will present the

settings.

Table of Contents

Do you have a question about the Performance Box Touch V1 and is the answer not in the manual?

Rlpbt-v1