Troubleshooting - Dantherm CD400 ECO Instructions For Use Manual

Troubleshooting

Before calling your local authorized Service Centre, check the following:
Problem
The dehumidifier does not
switch on
The appliance does not
dehumidify
The appliance works but the
humidity in the room is not
reduced
Cause
• the appliance is not plugged
in
• the humidostat is set to the
minimum position
• the canister is full
• the canister is not in position
• the filter is dirty
• the temperature or humidity in
the room is too low
• the room is too big
• too many sources of humidity
in the room (e.g. boiling
saucepans)
Solution
• insert the plug into the socket
• adjust the humidostat to the
desired position
• empty the canister
• position the canister correctly
• clean the filter
• in certain conditions, the
appliance will not dehumidify
the room (see "Technical
Characteristics")
15