Main Window Display; Up/Down Arrow Buttons - Lectrosonics DSR4 Quick Start Manual

DSR4 Front
Panel Controls
MENU/SEL Button
The MENU button accesses the
available menus and selects the
desired setting.
PWR/BACK Button
The PWR/BACK button is used to
turn the receiver on and off. When
browsing menus and making
changes to settings, press PWR/
BACK to return to previous menu.

Up/Down Arrow Buttons

The UP/DOWN buttons are used
to scroll or input the various op-
tions within each menu selection.
Antenna Port (2)
On the underside of the unit, par-
allel to the logo and PWR/BACK
button:
TA5M Connector
Routes analog audio Channels 3
and 4 or AES3 audio channels 1-4
to the top of the unit.
IR (infrared) Port
(just under the front panel)
Settings can be transferred be-
www.lectrosonics.com
tween transmitter and receiver or
receiver and receiver.
USB Port
(just under the front panel)
The microB USB port can be
used to connect the DSR4 to the
Lectrosonics Wireless Designer
software and to perform firmware
updates.
Main Window
Display
The Main Window displays infor-
mation concerning the RF levels
at each antenna per channel,
audio modulation levels, the con-
dition of the Pilot Tone (Hybrid) or
Link (digital), and power condi-
tions for both the receiver and the
associated transmitters. It is also
the access portal to menu selec-
tions for setting up the receiver
and searching for clear frequency
channels.(See Menu Selections
from Main window and Fre-
quency Scan Mode). The PWR/
BACK button will cycle between
the Home screen, showing all four
channels and the channel detail
screens. Use the UP and DOWN
arrows to go between individual
channels in the Channel Detail
view.
5