Table of Contents
Advertisement
5 Installation
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
5.1 Preparation for installation
Before installation, make sure the following
conditions are met:
− The actuator is not damaged.
− The type designation, material and tem-
perature range of the actuator match the
ambient conditions (temperatures etc.).
See the 'Markings on the device' section
for nameplate details.
5.2 Mounting the device
All versions of the Type 3379 Pneumatic Ac-
tuator are delivered ready-mounted on the
valve.
Î See valve documentation for more infor-
mation on mounting the control valve.
EB 8315 EN
Installation
5-1
Advertisement
Table of Contents
