Table of Contents
Advertisement
Start-up
6.3 Aligning the actuator (T1
version only)
Note
The T3 version of the Type 3379 Actuator
with 150 mm piston diameter cannot be
rotated.
Depending on the mounting position, it may
be necessary to align the position of the
pneumatic connections (see Fig. 6-1).
1. To align the actuator, insert a suitable
object, e.g. threaded rod or SAMSON
tool
into the exhaust air port and turn
1)
the actuator bonnet clockwise until it
reaches the required position.
Material no. 1281-0067 for Ø63 mm actuator,
1)
material no. 1281-0068 for Ø90 mm actuator
6-2
EB 8315 EN
Advertisement
Table of Contents
