58 | DX-D 40C, DX-D 40G | Getting started
Press and hold the power button for 1 second.
Figure 7: Power button
After startup the green status indicator is lit, indicating the power status.
4. Turn on the System Control Unit using the power switch.
The status indicator is green.
The green and orange status indicators on the DR Detector are lit. The DR
Detector is ready.
Before exposure make sure to check the equipment daily and confirm that it
works properly.
Related Links
Detector Status Indicators
0290A EN 20140626 1622
Note: Before operating the detector, start up the NX
workstation.
on page 71