Toro 41249 Operator's Manual page 7

Note:
The console opening is underneath
the valve mount.
Figure 8
1. Tube pair 14.9 m (16 ft)
2. Console opening
•
For model year 2016 and later sprayers:
Route the tube along the existing wire
harness through the console opening and to
the front of the seat base
Figure 9
1. Console opening
(underneath the valve
mount)
2. Tube pair 14.9 m (16 ft)
4. Secure the tubes to the existing wire harness
with cable ties (Figure 9
g206084
3. Valve mount
(Figure 8).
g206083
3. Valve mount
or Figure 8).
Installing the Foam Density Tubes
and the Foam Control Valve
Multi Pro 5000 Series Sprayers
1. Loosen and remove the compression nuts from
the valve body
Note:
Retain and set aside the compression
nuts.
1. White tube
2. Compression nut
3. Jam nut
2. Loosen and remove the jam nut from the valve
(Figure 10).
Note:
Retain and set aside the jam nut.
3. Use the previously removed jam nut to secure
the valve to the valve mount
4. Insert the blue tube and the white tube into a
compression nut
5. Secure the blue and white tubes to the valve by
screwing the compression nut onto the valve
(Figure 10).
6. Install the decal as shown in
12.
7
(Figure 10).
Figure 10
4. Valve body
5. Valve mount
6. Blue tube
(Figure 10).
(Figure 10).
Figure 11
g206568
or Figure