Toro 41249 Operator's Manual page 5

Figure 3
Multi Pro WM sprayer shown; Multi Pro 1750 sprayer is
1. Toward the compressor
2. Clear tube—compressor
to tank loop-back tube 92
cm (3 ft)
3. White compression
nut—cap
4. Blue tube—compressor to
tank loop-back tube 92 cm
(3 ft)
2. Remove the white compression nut and
assemble it onto the clear tube
3. Assemble the clear tube and white compression
nut onto the fitting at the side of the compressor,
and tighten the white compression nut by hand
(Figure 3).
4. Remove the blue compression nut from the
fitting at the side of the compressor
similar
5. Cap-mounted regulating
valve
6. Compression nut
(blue—compressor fitting)
7. Compression nut
(white—compressor
fitting)
(Figure 3).
(Figure
5. Assemble the blue tube and blue compression
nut onto the fitting at the side of the compressor,
and tighten the blue compression nut by hand
(Figure 3).
Connecting the Loop-Back Tube
and Foam Density Tubes at the
Tank and Compressor
Multi Pro 5800 Series Sprayers
1. Remove the white compression nut
fitting at the cap for the tank, and assemble it
onto the clear tube 92 cm (3 ft).
g206595
1. Clear tube—92 cm (3 ft)
2. Clear tube—foam density
tubes 4.9 m (16 ft)
3. Compression nut
(white—cap fitting)
2. Assemble the clear tube and white compression
nut onto the fitting at the cap for the tank, and
3).
tighten the white compression nut by hand
(Figure 4).
5
(Figure
Figure 4
4. Compression nut
(blue—cap fitting)
5. Front of the machine
4)
g411634