Toro 41249 Operator's Manual page 15

Storage
1. Move the vehicle onto a level surface, set the
parking brake, stop the pump, shut off the
engine, and remove the key.
2. Relieve pressure within tank by opening the
tank fill cap, install the tank fill cap, and hand
tighten it.
3. Disconnect the air and liquid tubing from the
tank.
Note:
Replace air and liquid tubing together
with the supplied tubing coupler.
4. Disassemble the foam nozzles and replace the
foam sponges.
5. Empty the tank of all soap and liquids to avoid
damaging the tank from freezing.
15