Table Of Contents - eXact PipeCut P400 Operating Instructions Manual

Contents
Contents
5 Technical data
6 Package contents
Safety
7 Safety instructions
9 Intented use and product features
Battery Charger
10 Charger information
11 Charger safety instructions
12 Charger operation
13 Charger maintenance, environment and guarantee
Operation
14 Before operating the tool
14 Precise setting of the cutting point
14 Setting the pipe on supports
15 Attaching the pipe saw to the pipe
15 Piercing the pipe wall
15 Sawing around a pipe
16 Heat indicator and feeding speed
16 Straightness of cut and adjusting wheel
17 Installing and changing the saw blade
18 Service and maintenance instructions
19 Environment /Disposal
19 Guarantee/Guarantee conditions
19 Tips for users
Declaration of Conformity
We declare under our sole responsibility that the products described under "Technical Data" are in
conformity with the following standards or standardization documents: EN/IEC62841-1, EN62841- 2-5,
EN55014-1, EN 55014-2, EN61000-3-2, EN61000-3-3 according to the provisions of the directives
2004/108/EC, 2006/42/EC.
For more information, please contact Exact Tools at the following address. The technical file is available at
the address underneath.
The person authorized to compile the technical file:
Marko Törrönen, R&D Manager (marko.torronen@exacttools.com)
Helsinki, 10.03.2022
Seppo Makkonen, Chairman of the Board
Exact Tools Oy
Särkiniementie 5 B 64
FI-00210 Helsinki FINLAND
4
eng lish