Table of Contents
Advertisement
About the Media Used
Types of Media
In this manual, the paper used for output is called "media." The two main types of media used in this ma-
chine are shown below.
• Roll media: Media wound onto a paper tube
• Sheet media: Media not wound onto a paper tube such as standard-size media
Various paper types of roll media and sheet media are selectable according to your purpose. For detailed
information about each media, contact your media supplier. Media can also be purchased from our web-
site.
RELATED LINKS
・ https://www.rolanddg.com/
Usable Media
This machine cannot print on every kind of media. Before selecting media, be sure to perform trial print-
ing to check whether satisfactory output quality is obtained.
Size
*1
Width
Cuttable media thickness
Maximum media thickness (including back-
*1
ing paper)
Maximum roll outer diameter
Paper tube (core) inner diameter
*1
Applies to both roll and sheet media
Maximum Roll Weight
6 kg (13.23 lb.)
Other Conditions
Media such as the following cannot be used.
• Media whose end is attached to the paper tube (core)
• Media that is severely warped or that has a strong tendency to reroll
• Media that cannot withstand the heat of the media heating system
• Media whose paper tube (core) is bent or crushed
• Media that bends under its own weight when loaded
• Media on a sagging roll
• Media that is rolled unevenly
14
Basic Information
• 150 to 170 mm (5.9 to 6.7 in.)
• 200 to 235 mm (7.9 to 9.3 in.)
• 287 to 322 mm (11.3 to 12.7 in.)
• 348 to 383 mm (13.7 to 15.1 in.)
• 393 to 429 mm (15.5 to 16.9 in.)
• 439 to 474 mm (17.3 to 18.7 in.)
• 487 to 515 mm (19.2 to 20.3 in.)
*1
Max. 0.22 mm (8.66 mil; depending on the media composition)
When only printing: 1.0 mm (39.4 mil)
When performing cutting: 0.4 mm (15 mil)
150 mm (5.9 in.)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Usable Media
Advertisement
Table of Contents
