Table of Contents
Advertisement
Printing
6.
Adjust the loaded position of the roll media.
(1)
Move the roll media to the right so the media flange ( ) touches the right media guide ( ).
(2)
Slide the left media guide ( ) and press it against the media flange.
7.
Pass the media through the printer.
Pull the media straight to keep it taut, and then pass it beneath the media clamps ( ).
CAUTION
The pinch rollers cannot be moved directly by hand. Move them with the media guide.
Attempting to forcibly move these rollers may result in injury.
8.
As shown in the figure, pass the media under the front cover and pull the media out the other side.
22
Basic Operations
OK
Not OK
Advertisement
Table of Contents
