Turbo Mode, Sleep Mode, Fan Speed - NuWave OXYPURE ZERO E1000 Owner's Manual

OPERATING THE OXYPURE
TURBO MODE • SLEEP MODE • FAN SPEED
Turbo Mode
Turbo mode allows you to run the unit at the highest fan speed for 30 Minutes, 1 hour,
or 2 hours. When used with other modes, Turbo mode has priority. Turn on the OxyPure
and press TURBO as follows:
1. Once to run at top fan speed for 30 minutes,
2. Twice to run at top fan speed for 1 hour, and
3. Three times to run at top fan speed for 2 hours.
If no other button is pressed after TURBO, then the OxyPure will go to Fan Speed 1 after
the set time.
Turbo + Auto Modes
Press TURBO and then AUTO: The OxyPure will run in Turbo mode for 30 minutes and
then Auto mode until changed.
Note: If more time in Turbo is desired, press TURBO until that amount of time is reached.
Turbo + Timer
1. When Turbo mode is running, the user may set a running time up to 12 hours by
pressing TIMER.
2. If you press TURBO once, the OxyPure will run for 30 minutes; twice, and it will
run for 1 hour; and three times, and it will run for 2 hours. The OxyPure will operate
under Turbo mode first for the selected time. It will then continue to run for the time
specified on the Timer. After that, it will go on the next mode or function.
Sleep Mode
When in Sleep mode, the LED lights on the control panel will be off, but the fan will still
be active. Adjust the fan speed to your preference prior to going into Sleep mode.
1. Manually adjust the Fan Speed with the FAN SPEED button.
2. Press and hold FAN SPEED for 2 seconds to activate Sleep mode.
3. To turn off Sleep mode, press any button.
Fan Speed
Adjust the OxyPure
Press once for fan speed level 1 (the first bar will light up), again for fan speed level 2 (the
first and second bars will light up), etc. Press FAN SPEED a 7th time to return to fan speed
level 1. No matter what mode it is, the OxyPure will display the current fan speed level.
12 | OxyPure Zero E1000
's fan speed by pressing FAN SPEED. There are 6 fan speed levels.
®