NuWave OxyPure HEPA 300, 47501 / 47502 - Air Purifier Manual

IMPORTANT SAFEGUARDS

HOUSEHOLD USE ONLY • READ ALL INSTRUCTIONS BEFORE USE
ALWAYS KEEP THIS MANUAL HANDY FOR FUTURE REFERENCE.
READ ALL INSTRUCTIONS and WARNINGS: The failure to follow any of the important safeguards, warnings, or instructions for safe use is a misuse of the OxyPure that can void your warranty and create the risk of serious injury. When using the OxyPure, basic safety precautions should always be followed.

1. ONLY use the OxyPure for its intended purpose.
2. To protect against the risk of electrical shock, DO NOT immerse the cord, plug, or any part of the OxyPure in water or any other liquid.
3. Close supervision is necessary when the OxyPure is used by or near children. The OxyPure is not intended for use by children, persons with reduced physical, sensory, or mental capabilities, or those who lack expertise or knowledge of this device.
4. DO NOT operate the OxyPure with a damaged cord, plug, after any malfunction, or if the unit has been dropped or damaged in any way. Contact Customer Service.
   For Amazon purchases: support@nuwavenow.com
   For All Other Purchases: help@nuwavenow.com
5. Discard the protective plastic covering the power plug before use.
6. DO NOT run the cord under carpeting, throw rugs, runners or other coverings.
7. DO NOT route the cord under furniture or appliances. Arrange the cord away from high-traffic areas where it will not be tripped over.
8. DO NOT plug the OxyPure into an outlet or power strip that is being used by other appliances.
9. Remove any dust or water from the plug, if needed.
10. ALWAYS set up the OxyPure on a flat, stable surface.
11. DO NOT set up the OxyPure where it could be pushed, kicked, or tripped over.
12. Leave at least 2-3 feet of space between the OxyPure's vents and any walls.
13. DO NOT install the OxyPure near a heating device, flammable or combustible gases or vapors, or in areas exposed to moisture or water.
14. DO NOT operate the OxyPure on its side.
15. DO NOT place objects on top of the OxyPure.
16. DO NOT sit or stand on, or lean against, the OxyPure.
17. Alteration or modification of any part of the OxyPure, or the use of attachments not recommended by the manufacturer, may cause fire, injury, or damage to property.
18. As with most electrical units, electrical parts are live even when the OxyPure is off. Be sure the OxyPure is unplugged when assembling.
19. DO NOT use the OxyPure in a factory or industrial setting where machine oil may be present in the air.
20. Turn the power OFF on the OxyPure before unplugging the OxyPure.
21. Unplug the OxyPure from the outlet when the unit is not in use or will be left unattended for an extended period of time; before putting on or taking off parts; when removing or replacing the filter; and before cleaning.
22. DO NOT operate the OxyPure if abnormal sounds or motion is detected.
23. If any foreign object comes into contact with the fan, do not operate. Turn off and unplug the OxyPure and then shake the unit to dislodge the foreign object.
24. Inspect the OxyPure for any loose or missing parts before and after each use. If parts are loose, damaged, or missing, contact Customer Service.
    For Amazon Purchases: support@nuwavenow.com
    For All Other Purchases: help@nuwavenow.com
25. DO NOT pull, lift, drag, or carry the OxyPure by its cord.
26. DO NOT block the air inlet or outlet vents.
27. DO NOT operate the OxyPure without the filter.

FILTER CHANGING PRECAUTIONS

1. DO NOT try to clean the HEPA/Carbon filter. Doing so will release dust and other pollutants back into the air.
2. ALWAYS wear a mask and rubber gloves when handling a dirty filter.
3. When removing a dirty filter, ALWAYS do so outside or in a well ventilated area.
4. ALWAYS replace your filter with a NuWave filter made for your model of air purifier.

ELECTRICAL INFORMATION

These servicing instructions are for use by qualified personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Power-Supply Cords
A short, detachable power-supply cord is provided to reduce the risk of becoming entangled in, or tripping over a longer cord. Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use. If a longer, detachable power-supply cord or extension cord is used:

1. The marked electrical rating of the extension cord should be at least as great as the electrical rating of the appliance.
2. The longer cord should be arranged so that it will not drape over any counter-top or tabletop where it could be pulled on or tripped over unintentionally.
3. The OxyPure should be operated on a separate electrical outlet from other operating appliances due to wattage limitations.

PARTS & ACCESSORIES

1. OxyPure HEPA 300 Air Purifier
   Model #: 47501
2. Motor
   Part #: H0P4
3. Pre-Filter & Filter Holder
   Part #: H0P1
4. HEPA/Carbon Filter
   Part #: H0A1
5. Filter Access Lid
   Part #:H0P2
6. Non-Skid Feet
   Part #: H0P5
7. Power Supply
   Part #: H0P3

ORDERING PARTS

Keeping your OxyPure up and running with new filters is a breeze.
Ordering new parts and accessories is quick and easy. Have ready down the name and number for the part you want, then contact Customer Service by emailing:

• For Amazon Purchases: support@nuwavenow.com
• For All Other Purchases: help@nuwavenow.com

Or order directly online at: www.nuwavenow.com

ASSEMBLY

Remember...
ALWAYS remove the plastic wrapping from the new filter BEFORE using it in the OxyPure. Failing to do so may damage the motor and other parts of the OxyPure and may void your warranty.

CONTROL PANEL

One Button Does it All
Simplicity. That is the secret of the OxyPure HEPA 300 Air Purifier. With only one button, it is simple to operate. With its revolutionary HEPA/Carbon filter, it is as easy to relax knowing that your air is as clean as the unit is simple to maintain. With its lightweight design and construction, it is easy to take almost anywhere. Simplicity and peace of mind at the touch of a button.

1. Plug the Power Supply cord into the jack at the back of the OxyPure, and then plug it into a suitable electrical outlet. The unit will beep once.
2. Press the Power icon. The unit will activate at the lowest fan speed. It will beep once and the upperright LED will light.
   
3. Press the Power icon again to increase the fan speed to medium. The unit will beep and the second LED will light.
   
4. Press the Power icon again to increase the fan speed to high. The unit will beep and the third LED will light.
   
5. Press the Power icon a fourth time and the OxyPure will turn off. The unit will beep and the LEDs will go dark.

View OxyPure® Test and Performance Data" on our website https://www.nuwavenow.com/shop/oxypure-hepa

MAINTAINING THE OXYPURE

Changing the HEPA/Carbon Filter

It is important to change the HEPA/Carbon Filter regularly.

When the Fan Speed 1 light turns yellow, we suggest replacing your HEPA/ Carbon Filter.

When the Fan Speed 1 light turns red, the HEPA/Carbon Filter has reached the end of its lifespan and must be replaced.

1. Unplug the unit, turn it upside down and open the Filter Access Lid.
2. Remove the old filter using the attached tabs.
3. Remove the new filter from its packaging. The bag can be used to discard the old filter.
4. Insert the new filter while ensuring the tabs are facing up, then close the Filter Access Lid.

Cleaning the OxyPure

Depending on the environment, you may need to clean the OxyPure more often to maintain the finish and function of the unit.

• Remove the dirty HEPA/Carbon Filter and place it in a garbage bag.
• Wash the Pre-Filer body of the unit with warm, soapy water, and dry thoroughly before inserting a clean HEPA/Carbon Filter. Alternatively, you can apply a gentle non-abrasive cleaner to a cloth and use the cloth to clean the unit.
• Make sure the vents are free of any obstruction.
• Ensure the OxyPure body is completely dry before reassembling.
• Clean the Motor housing on all sidesides, using the brush attachment for your vacuum cleaner or a damp cloth or sponge. Dry it thoroughly before reassembly.
• DO NOT immerse the Motor housing in water.
  

TROUBLESHOOTING GUIDE

The OxyPure Does Not Turn On

1. The unit is not plugged-in. Plug the unit into an appropriate wall outlet.
2. POWER on the control panel is OFF. Press POWER.

The Fan Speed Doesn't Change

There may be an issue with the control panel button. Contact Customer Service for assistance.

Airflow From the Top Vent is Weak

The HEPA/Carbon filter is dirty. Change the filter.

The Unit Produces Smoke or Odor

The HEPA/Carbon filter is dirty. Change the filter.

If any of these problems persist, contact NuWave's friendly and knowledgeable Customer Service by emailing:
For Amazon Purchases: support@nuwavenow.com
For All Other Purchases: help@nuwavenow.com

nuwavenow.com