Auto Mode, Ultimate Clean Mode, Eco Mode - NuWave OXYPURE ZERO E1000 Owner's Manual

Auto Mode
Auto mode allows you to run the unit automatically at the lowest fan speed until the unit
detects a drop in the air quality, at which point it will go to the highest fan speed until air
quality improves.
1. Press AUTO, and the Power and Auto back lights will turn on.
2. The unit will automatically go into Auto mode. There is no time limit on Auto mode.
Note: The AUTO and FAN SPEED buttons cannot work together. While in Auto mode, if
you press FAN SPEED, Auto mode will turn off, replaced by Manual Fan Speed mode.
While the unit is running in Auto mode, the user can adjust the working time by pressing
TIMER. While Manual Fan Speed is engaged, if you press AUTO, the unit will go into Auto
mode and remain in Auto mode until changed.
Ultimate Clean Mode
When in Ultimate Clean mode, the OxyPure
based on your air quality and run as long as is necessary to clean the air.
1. Press ULTIMATE CLEAN. The LEDs around the ULTIMATE CLEAN button will be lit
green.
2. Press ULTIMATE CLEAN again to turn it off.
Note: The ULTIMATE CLEAN and FAN SPEED buttons cannot work together While in
Ultimate Clean mode, if you press FAN SPEED, Ultimate Clean mode will turn off, replaced
by Manual Fan Speed mode. While the unit is running in Ultimate Clean mode, the user
can adjust the working time by pressing TIMER. While Manual Fan Speed is engaged, if
you press Ultimate Clean, the unit will go into Ultimate Clean mode and remain in Ultimate
Clean mode until changed.
ECO Mode
ECO mode allows you to save energy and money by turning the OxyPure fan and LEDs off
when the unit is not needed. Press POWER and then press and hold AUTO for 1 second.
The unit will then go into Eco mode. The LED light above Eco Mode will be green.
• When the air quality is poor, the fan will automatically run.
• When the air quality is good, the fan will turn off.
To run both Eco and Ultimate Clean or AUTO modes together, press ULTIMATE CLEAN
or AUTO while Eco Mode is activated. The running time for Ultimate Clean is adjustable by
pressing TIMER until the desired time is selected. The OxyPure
Ultimate Clean until the time is finished, after which it will return back to just Eco Mode.
Press and hold AUTO for 2 seconds to deactivate Eco mode. Once Eco mode
is off, the Power light will turn back to green and the OxyPure will return to its
previous setting.
OPERATING THE OXYPURE
AUTO MODE • ULTIMATE CLEAN MODE • ECO MODE
will automatically adjust the fan speed
®
will run in Eco Mode and
®
nuwavenow.com | 11