Nuwave Connect App - NuWave OXYPURE ZERO E1000 Owner's Manual

THE NUWAVE CONNECT APP
MONITOR AND CONTROL THE OXYPURE REMOTELY
Using the built-in QR reader in your Camera App:
1
Scan the QR code below.
2
It will take you to the App's download page on either the Google
Apple AppStore, then just follow the download and installation instructions.
If your phone does not have that capability built-in, simply download a 3rd-Party QR
Scanning App before scanning the NuWave
Downloading a QR reader App:
1
Open your mobile app store (App Store, Google Play).
2
Search for "QR code readers."
3
Simply download the QR code reader to your phone, open it, scan the
code and you are ready to go.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
8 | OxyPure Zero E1000
™
QR Codes and you are ready to go.
®
Play Store or the