Assembly Guide - NuWave OXYPURE ZERO E1000 Owner's Manual

MAKE SURE ALL FILTERS ARE INSTALLED BEFORE USE
Before Use:
1. Make sure the OxyPure
panel on the back to expose the filters.
2. Pull the filters from their slots.
3. Remove the plastic wrapping from the filters.
4. Fully reinsert the filters into the Oxypure and close
the panel.
5. Remove the sticker from the control panel, making sure
to fit the sensor tabs into their corresponding slots.
4
1 2 3 2 1
3
2 3
Bio-Guard
®
Filter (2)
Emission
Removal
is unplugged. Open the
®
1
Stainless Steel
Pre-Filter (2)
4
Bio-Guard
Ozone
360 Filter
Filter (2)

ASSEMBLY GUIDE

Air Filter Assembly
The OxyPure
®
different preassembled filters inside the
unit (see diagram below). Each filter
is labeled with a number and an "L" or
an "R" for Left and Right.. Match these
with the slot numbers when installing
the filters. When the filters require
cleaning, please refer to Cleaning &
Maintenance.
To install the Bio-Guard
simple slide it into place in the center.
Tabletop Use
To use the OxyPure as a tabletop unit,
simply remove the wheels to ensure that
it is stable and does not roll off the table.
®
comes with seven
360 filter,
®
nuwavenow.com | 7