5.6. Cleaning your ThunderSync3-C10
Cleaning the product is generally not required, although in some instances it may be necessary if
excess dirt/ dust/ hair has accumulated, or if minor liquid spillages have occurred on the module
during operation or storage.
Ensure that the product is switched off and the power cord is removed from the product. Hold
l
the power cable by the plug and do not touch either the plug or the power cord with wet or
damp hands as an electrical shock may result
Wipe the product with a clean, dry and soft cloth. Do not use detergents which contain alcohol,
l
solvent or surface-active agents. Do not spray water or detergent directly onto the product
Mildly dampen a soft and dry cloth in water and wring thoroughly to clean the product as
l
required
Dry the product thoroughly once the cleaning has finished
l
Reconnect the power cord and use your product as advised once cleaning is complete
l
ThunderSync3-C10
Electric shock or personal injury may occur
If there is a dirt/ spillage over a ventilation slot, external data/ power
connector or product aperture, please remove power from the unit without
touching the liquid and seek advise before reapplying power
CAUTION
Page 25 of 41
Need help?
Do you have a question about the ThunderSync3-C10 and is the answer not in the manual?