Advertisement
Quick Installation Guide
00825-0100-4379, Rev DA
October 2008
Verify that the 753R has successfully transmitted to iTraX
1. Log into iTraX (Figure 3 on page 11)
a. https://itrax.datacom.com.
b. Enter your username.
c. Enter your password.
2. Locate the integral and remote tags on the Summary page as shown in Figure 4 on page
12 and verify successful completion of the transmission at the time of installation. (See
Received Time Column.) The tag for the remote measurement transmitter will be a T
followed by the transmitter's Device ID number.
3. Configure the 753R
a. Log into iTraX
• https://itrax.datacom.com.
• Enter your username.
• Enter your password.
b. Locate and select the integral tag on the Summary page.
c. Select Device from the menu on the left side of the screen.
d. Navigate through the configuration options for any desired changes to the 753R
configuration.
e. Click Submit prior to leaving any page where the configuration has been updated to
save these changes.
f. Repeat steps b through e for the remote measurement transmitter.
Figure 3. Log In Screen
®
Rosemount 753R Indicator
®
11
Advertisement
