GE MAC 5000 Operator's Manual page 48

Equipment Overview: Getting Started
Start Up Screen (Exercise Option)
A B C D E
0:20
EXERCISE
0:20
STAGE 1
TREADMILL
10 Watts
Waiting for Stable Heart Rate
V1
II
V5
Patient Data
Name
A system Error or informational messages appear in this area.
messages
B current heart The top horizontal line is the maximum predicted
rate bar graph heart rate (220 - age). The line below that is the
target heart rate (a percentage of 220 - age). At the
start of EXERCISE phase, a third line representing
the resting heart rate will appear.
2-20
F G H I J K L
75
155
BPM
120/80
MD1207-028D
Description
Name
C workload level Indicates the units of measurement and can be
changed.
D phase and The top clock displays the total time in a phase. The
stage clocks bottom clock displays the time in a stage. During the
TEST-END phase, the top clock displays the total
time in the EXERCISE phase and the bottom clock
displays the total time in the RECOVERY phase.
E current phase Top is phase name, bottom it stage name.
and stage name
F protocol name
G Rhythm formats Use System Setup (see Chapter 14,
System Setup") or Ld Select to change the leads
displayed and printed.
H medians Current, pretest.
I systolic/ The BP numbers become dim if the BP has not
diastolic blood changed in over one minute.
pressures
J current heart Determined by the three leads displayed on your
rate screen during the PRE-TEST phase.
K function icon Indicates the Main Menu function the system is
using. This is the Exercise function.
L battery status Indicates how much charge the battery has
icon available.
MAC 5000 System — 2000657-057, Revision B
Description
"Defining the