Preparation Before Returning The Unit To The User - Epson Stylus Photo R3000 Service Manual

Epson Stylus Photo R3000

1.1.4 Preparation before Returning the Unit to the User

When returning the printer to the user, make sure to secure the specified points with tapes to avoid damaging the
printer during transport.
 Attaching the front tray lock (tape length: 90
Attach the front tray lock and secure it with strong tape as follows.
1. Attach the front tray lock on the position shown in
2. Attach the unfolded end of strong tape on the front tray lock as shown in
apply it along the shapes of the Upper Housing Support Assy to secure the front tray lock.
 Securing the CR Unit (tape length: 220
Secure the CR Unit with strong tape as follows.
1. Open the printer cover and move the CR Unit to its home position.
2. Attach the unfolded end of strong tape on the CR Unit, and pull the tape and apply it along the shapes of
the Upper Housing Assy to the right side of the printer to secure the CR Unit.
Disassembly/Reassembly

Figure 1-2. Attaching and Securing the Front Tray Lock

2 mm, tape width: 18 mm, fold one end by 5 mm)
CR Unit
Figure 1-3. Securing the CR Unit
2 mm, tape width: 18 mm, fold one end by 5 mm)
Figure 1-2.
Front tray lock
Strong tape
Overview
Figure 1-2, and pull the tape and
Strong tape
Folded end
Attach strong tape with
its unfolded end sticking
out of the printer.
Revision A
11
Confidential