Table of Contents
Advertisement
TTI882MLT
Sanding
Do not use the same sanding sheet for wood and metal.
Metal particles become embedded in the sanding sheet and will
scour a wooden surface.
The removal rate and the sanding pattern are determined by the
choice of sanding sheet and the work surface.
Apply uniform sanding pressure to extend the life of the sanding
sheets.
Increasing the sanding pressure does not lead to an increase of
the sanding capacity, but instead it increases wear on the machine
and the sanding sheet.
Use only the tip or an edge of the sanding sheet for precise
sanding of edges, corners and hard to reach areas.
When selectively sanding on one spot, the sanding sheet can heat
up considerably.
Remove the tool from the surface periodically to permit the
sanding sheet to cool down.
A sanding sheet that has been used for metal should not be used
for other materials.
Use only original sanding accessories.
WARNING! Always switch the product off, disconnect
the product from the power supply and let the product
cool down before performing inspection, maintenance
and cleaning work!
EN
Operation
31
31
Advertisement
Table of Contents
