Table of Contents
Advertisement
TTI882MLT
To select the sanding sheets
Sanding sheets are available with different grain sizes (grit),
depending on the workpiece material and material removal.
Grit
60 or less
80-100
120-150
180-220
240 or more
To attach the accessories
Turn the quick-release lever (2) anticlockwise until to hear a "click"
sound. Press and turn the flange bolt (11) 90° clockwise and pull
out to remove it (Fig. 2&3).
Ensure that the accessory attachment plate (10) and the drive
shaft are clean.
Align the grooves on the suitable accessory with the ribs on the
attachment plate. Put the accessory onto the attachment plate (10)
(Fig. 4&5).
Type
Very coarse Material removal, heavy paint
Coarse
Medium
Fine
Very fine
WARNING! Always wear protective gloves when
changing accessories.
The edges of the application tools are sharp and can
become very hot after working.
Always disconnect the tool from the power source when
assembling, making adjustments, or changing
accessories.
Example of use
Paint removal, rough surface
preparation (e.g. non-planed wood)
Surface preparation planed wood
Sanding between coats
Final finishing
Before you start
EN
23
23
Advertisement
Table of Contents
