Titan TTI882MLT Manual page 13

TTI882MLT
How to reduce the amount of dust?
1. Reduce the amount of cutting by using the best
sizes of building products. Use a less powerful e.g.
a block cutter instead of angle grinder.
2. Using a different method of work altogether – e.g.
using a nail gun to direct fasten cable trays instead
of drilling holes first.
3. Please always work with approved safety
equipment, such as those dust masks that specially
designed to filter out microscopic particles and use
the dust extraction facility at all time.
For more information please see the HSE website:
http://www.hse.gov.uk/construction or
http://www.hse.gov.uk/pubns/cis69.pdf
EN
Safety
13 13