Advertisement
uniquegardendecor.com
(866) 382-8600
FT-125A
36"Lx3.75"Wx32"H
274 Lbs
FT-125C
9.25"Lx4.25"Wx4.5"H
9 Lbs
A-375
5.25"Lx6"Wx3"H
3 Lbs
PK300 Pump (1)
#10 compression stopper (1)
Approx. 12" length of ½" Black Non-Kink tubing (2)
Approx. 3" length of 5/8" Clear tubing (1)
Wedges (2)
2.8 oz. tube of clear silicone (1)
4mm Allen wrench (1)
Hose clamps (5)Note – Hose clamps may be used
for flow restrictor
FT-125 X3 Fountain
(4 pieces)
COMPONENTS AND PARTS LIST
FT-125B
28"Lx13.75"Wx10"H
148 Lbs
FT-125D
20"Lx10.5"Wx6"H
69 Lbs
A-376
5.75"Lx3"Wx2.5"H
9 Lbs
Pump Kit Parts List
NOTE: Component photos are not to scale
Tools you will need
Level
4mm Allen wrench (included)
This fountain uses cover
FTNCOV-MED
Revised May 24, 2012
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for YARDART FT-125 X3
Summary of Contents for YARDART FT-125 X3
- Page 1 FT-125 X3 Fountain (4 pieces) Revised May 24, 2012 uniquegardendecor.com COMPONENTS AND PARTS LIST (866) 382-8600 FT-125A FT-125B 36”Lx3.75”Wx32”H 28”Lx13.75”Wx10”H 274 Lbs 148 Lbs FT-125D 20”Lx10.5”Wx6”H FT-125C 69 Lbs 9.25”Lx4.25”Wx4.5”H 9 Lbs NOTE: Component photos are not to scale A-376 A-375 5.75”Lx3”Wx2.5”H...
- Page 2 FT-125 X3 Fountain (4 pieces) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS Two people are recommended for the installation of this fountain! 1. Make sure you are assembling your fountain on a level surface. 2. Be sure to check the leveling of the fountain after each component installation.
- Page 3 FT-125 X3 Fountain (4 pieces) Revised January 31, 2012 WINTER CARE AND GENERAL FOUNTAIN INSTRUCTIONS - W I N T E R C A R E - Fountain bowls/tops and other fountain components, which collect water, should not be left outside in the winter since any component, which fills with water and freezes may crack.
Need help?
Do you have a question about the FT-125 X3 and is the answer not in the manual?
Questions and answers