Advertisement
Fountain holds
approximately 1 gallon of
water
Pump Kit Parts List
PK120 Pump (1)
#7 compression stopper (1)
Approx. 10" length of 1/2" Black Non-Kink tubing (1)
Hose clamps (3)
4mm Allen wrench (1)
Note – Hose clamps may be used for flow restrictor
FT- 129 Portico Fountain
(1 piece)
COMPONENTS AND PARTS LIST
FT-129A
16"L x 11"W X 26.5" H
89 Lbs
Revised May 24, 2012
uniquegardendecor.com
(866) 382-8600
This fountain uses
cover FTNCOV-SM
Tools you will need
Level
4mm Allen wrench (included)
Advertisement
Table of Contents
Related Manuals for YARDART FT-129A
Summary of Contents for YARDART FT-129A
- Page 1 FT- 129 Portico Fountain (1 piece) Revised May 24, 2012 COMPONENTS AND PARTS LIST FT-129A 16”L x 11”W X 26.5” H 89 Lbs uniquegardendecor.com (866) 382-8600 Fountain holds This fountain uses approximately 1 gallon of cover FTNCOV-SM water Pump Kit Parts List...
- Page 2 FT- 129 Portico Fountain (1 piece) Revised May 24, 2012 ASSEMBLY INSTRUCTIONS 1. Make sure you are assembling your fountain on a wall and using a hanging method that will sufficiently hold more than 100 pounds (component + pump + water weight). 2.
Need help?
Do you have a question about the FT-129A and is the answer not in the manual?
Questions and answers